Entering Attempts (Maintenance) on Existing Leaks

You can add an attempt via the Leak Record, Chateau Mobile, the Attempt grid in the Inspection and Attempts section, or the Attempt grid in the Inspections and Attempts section on the single component view.

Through the Leak Record

1. Click the Leak section.
2. Select the leak you wish to add an Attempt to and open it.
3. Click Add Attempt button.
4. The tag and LUnit will be preloaded for you, enter the appropriate information on the Attempt screen, then click Save.

In Chateau Mobile

When a failing inspection is recorded:

1. After recording a failing inspection, you will be asked if you would like to make an Attempt, if this setting is turned on in your database (See Miscellaneous Settings for more information).
2. Click Yes (if OGI leak, you may tag your image and/or video).
3. Fill out who performed the Attempt and the AttemptHow used.
4. Click Save or Save and ReTest.

After a failing inspection is recorded:

1. Find the target component in the tag list or use Search by Tag.
2. In Quick View or Component Details, tap the Task Menu (3-dot icon in the upper-right corner), select Attempt Repair, if this setting is turned on in your database (See Miscellaneous Settings for more information).
3. Click Yes (if it is an OGI leak, you may tag your image and/or video).
4. Complete the Simple Maintenance Checklist, if prompted.
5. Fill out who performed the Attempt (it does not have to be the monitoring technician), time, and the AttemptHow used.
6. Click Save or Save and ReTest.

Through Inspections and Attempts

Inspections and Attempts section:

1. Click the Inspections & Attempts section.
2. Click the Attempts subtab.
3. Click Add Attempt.
4. You will need to populate the tag and LUnit and enter the appropriate information on the Attempt screen, then click Save.

Inspections and Attempts section on a specific tag:

1. Open the specific tag.
2. Click the Inspections and Attempts tab.
3. Click the Attempts subtab.
4. The tag and LUnit will be preloaded for you, enter the appropriate information on the Attempt screen, then click Save.

The attempt will attach to any leak record or DOR that was or is active when the attempt was performed (based off the Date Performed field on the attempt), even for Attempts or inspections manually added after the DOR or Leak was closed.