You can add an attempt via the Attempt grid, the Leak grid, or the Leak Record. We are going to focus on the most common method: the Leak grid.
Through the Leak Grid
-
Click the Leak tab.
-
Select the leak you wish to add an Attempt to.
-
Click Add Attempt button.
-
The tag and LUnit will be preloaded for you, enter the appropriate information on the Attempt screen, then click Save.
In Chateau Mobile
When a failing inspection is recorded:
-
After recording a failing inspection, you will be asked if you would like to make an Attempt.
-
Click Yes (if OGI leak, you may tag your image and/or video).
-
Fill out who performed the Attempt and the AttemptHow used.
-
Click Save or Save and ReTest.
After a failing inspection is recorded:
-
Find the target component in the tag list or use Search by Tag.
-
In Quick View or Component Details, tap the Task Menu (3-dot icon in the upper-right corner), select Attempt Repair.
-
Click Yes (if it is an OGI leak, you may tag your image and/or video).
-
Complete the Simple Maintenance Checklist, if prompted.
- Fill out who performed the Attempt (it does not have to be the monitoring technician), time, and the AttemptHow used.
- Click Save or Save and ReTest.
Adding Attempts on Previously Identified Leakers
You can enter the Attempt by going to Inspections & Attempts, clicking the Attempts subtab, and then clicking Add Attempt. It will appear on any reports and DOR details as these reports and views show any Attempt or inspection with a Date Performed while the DOR and Leak were opened, even for Attempts or inspections manually added after the DOR or Leak was closed.