| Name | Description | Type |
|---|---|---|
| Excess Inspections | Technician has performed number of inspections in excess of the settings found in Pace Settings. | Event |
| Final Monitoring Time Less Than X Seconds | Under normal circumstances, Chateau Mobile will prevent a technician from monitoring a component faster than the rate you set for each component type (and size) in the Inspection Sample Time setting in the Settings tab. This feature is designed to comply if you have a requirement to check, or audit, to confirm no component was monitored too quickly. Chateau is designed to PREVENT this kind of error, but also provides this tool to audit, check, and confirm the tool (and technicians) are all operating properly. |
Event |
| Inspections After Hours | Inspections that occurred after the time set in Pace Settings ‘Monitoring Time After’ field. Note: This audit will only look at the inspections happened within 30 or 60 days prior to the date it was run most recently. |
Event |
| Inspections Before Hours | Inspections occurring before the time set in the Pace Settings Monitoring Time Before field. Note: This audit will only look at the inspections happened within 30 or 60 days prior to the date it was run most recently. |
Event |
| Inspections With No GPS | Inspections that do not have GPS. Note: This audit will only look at the inspections happened within 30 or 60 days prior to the date it was run most recently. |
Event |
| Inspections Without Barcode | All inspections where the component’s barcode was not scanned before recording the inspection. | Event |
See Types of Audits for descriptions of the “Type” column terms above.