| Term | Definition |
|---|---|
|
Active/DeActivate
|
To deactivate an analyzer in the database, select the analyzer in the grid and click DeActivate in the analyzer details.
The Show Inactive Analyzers toggle will allow you to see the deactivated analyzers, you can make them active by selecting them and clicking ReActivate in the analyzer details. |
| Add | When you want to add a new Analyzer. |
| Days since last Calibrated | Data calculated by Chateau which can be reported to the Owner’s Porch. |
| Days since last Previous Calibration | Data calculated by Chateau which can be reported to the Owner’s Porch. |
| Detector Type | So that you can track this, if desired. |
| Edit | When you want to. |
| On/Off Site | This will present or hide this Unit from your picklist. |
| Peg Factor |
The highest PPM value for an analyzer that can be relied upon for emission calculations. If the actual PPM of the leak (e.g. 150,000 PPM) is higher than the peg factor for the analyzer used (e.g. 100,000 PPM), then the peg factor will be used for all emissions calculations. You can enter the peg factor for each analyzer in Resources / Analyzers. If a phx42 is added to the database through Chateau Mobile, then a peg factor of 100,000 is automatically assigned. For all other analyzers, the peg factor will be set at 10,000. If you want to edit that number, you can do so by going to Resources / Analyzers. |
| Save | When you have added or edited an Analyzer. |
| Serial # | Serial # corresponding to the analyzer. |
| Warranty Date | So you can track this, if desired. |
Chateau
Was this article helpful? If not, please submit feedback below.
Previous