Skip to main content

Deleting or Correcting a Daily Calibration

Published: 2026-11-03      Revised: ---

This article explains what you can change on a daily calibration record in Chateau, and what to do when a record needs to be removed.

Can I delete a daily calibration?​

No. Daily calibration, drift, and precision calibration records can't be deleted in Chateau. This applies to all users and all record sources.

If a calibration record needs to be removed (for example, a duplicate session or a session entered for the wrong analyzer or date), contact Support. See Contact Support to remove a record.

What you can correct yourself​

Manually entered sessions​

Sessions entered by hand in Chateau can be edited.

  1. Go to Resources > Calibrations > Daily Calibrations.
  2. Search for the calibration date and analyzer.
  3. On the session heading, click the pencil icon (Edit calibration).
  4. Make your changes on the Daily Calibration, Noon Drift, or EOD Drift tabs. You can change the technician, probe type, cylinders, times, drift method, readings, Pass/Fail, and comment. The analyzer can't be changed.
  5. Click Save.

Note: Changing readings recalculates Pass/Fail. If you change the calibration date or time, re-check any inspections that rely on that calibration.

For full steps, see Manually Entering Daily Calibration Confirmations and Manually Entering Drifts.

Sessions from a SpanBox or analyzer​

Sessions recorded by a SpanBox or analyzer show a lock icon and can't be edited. This protects the original calibration data.

Adding a missing Noon or EOD drift​

If a technician missed a drift, you can add it, even to a locked session:

  1. Go to Resources > Calibrations > Daily Calibrations and search for the date and analyzer.
  2. On the session heading, click + Noon Drift or + EOD Drift. These buttons only appear when the daily calibration passed and that drift hasn't been recorded yet.
  3. In the window that opens, enter the drift time, drift method, readings, and results.
  4. Click Save.

Tip: Don't add a second daily calibration session to fix a missing drift. Use + Noon Drift or + EOD Drift on the original session instead. Extra sessions for the same analyzer and day can't be deleted and will need Support to remove them.

Contact Support to remove a record​

Email support@ldartools.com with:

  • The database name
  • The analyzer serial number
  • The calibration date and time of each record to remove
  • The reason for removing it (for example, duplicate session or wrong analyzer)
  • If you need a replacement record entered, the correct details