Skip to main content

Leaks Tab

Published: 2022-05-09      Revised: 2026-11-13

Open Leaks grid

SubtabDescription
AVO EventsSee AVO Events.
DORsView, edit or close your open DORs, and add documents and attempt records. Or open the Closed DORs grid to manage your closed DOR records.
LeaksManage open leaks in the Open Leaks grid, and review a tag's full leak history in the All Leaks grid. Open Leaks is the working grid for leaks that are still open: select one or more to set a next action, schedule a retest, plan a DOR, add to a tour, add a comment or close them. All Leaks is a view-only grid covering both open and closed leaks in one place. It opens with a Date Opened criterion already filled in for the last seven days, shown in the query builder, so it is not the whole history until you widen or clear that criterion and search again. Open-only columns such as Next Action, Waiting Action and Last PPM are blank on closed rows, and close-only columns (Close Why, Close Date, Closed By) are blank on open rows.
AlertsSet up automated emails about open leaks and open DORs. See Alerts.
ShutdownsManage your existing shutdowns or add new ones. Shutdowns can be set to either LUnit or Process Unit. You must enter a name, description, start date and end date (the end date is labeled Shutdown End (Startup)). Expected Emissions are optional, and are entered in either kilograms (kg) or pounds (lbs), chosen with the radio buttons beneath the field. Use the Show Deactivated Shutdowns toggle above the grid to bring deactivated records back into view.

In the Grid​

Leaks are triggered by failed inspections. If you need to add a leak manually, add the inspection record that triggered it. See Inspections for how to add an inspection.

Some columns below are hidden by default. To add one to the grid, see Showing a hidden column.

TermDescription
Associated LeaksA set of leaks on the same component, generated by different leak definitions or leak response days under different rules. For example, if Tag 17 had a 1,100 PPM reading that opened a leak for Rule A (500 PPM) and Rule B (1,000 PPM), Chateau has two leaks but recognizes they share the same component and inspection.

Shared Leaks

Hover over any leak in a set and every member of the set turns bold at once. Selecting one does not tick the others (the count at the bottom of the grid still reads Selected: 1), but opening one opens a tab for each of the others, as the note above the grid says.
B & C in Due DatesB means the deadline is counted in business days, and C means calendar days.
Close WhyThe reason recorded against a closed leak, chosen in the dialog that appears when you click Close Leak. It arrives set to Pass, and the Leak Close effective date beside it defaults to today. The list of reasons is set per database, so yours may differ. A second confirmation step follows before anything is saved. Watch for this: the reason box has an × that clears it, and clearing it does not gray out the Close Leak button. If you clear the reason and click Close Leak, the dialog closes and the leak stays open, with no error message. If a leak you thought you closed is still open, check that a reason was selected and close it again.
Closing Multiple LeaksSelect more than one leak and click Close [N] Leaks to close them all with the same date. Chateau limits the Date Closed you can choose based on the most recently opened leak, so you can't pick a close date before a leak's open date.
Emission PointThe point on the component where the leak was detected, such as Bonnet, Stem or Cap. Set the options in Settings > Picklists, Category = Leaks, picklist Emission Point. If the wrong emission point was entered, you can edit it here.
Final Resolution DueWhen the Final Resolution is due, based on the rule applied.
First Attempt DueWhen the First Attempt is due, based on the rule applied.
First Retest DueWhen the first retest is due, based on the rule applied.
Last AVO ResultPass or Fail from the most recent AVO inspection on the component since the leak opened. Hidden by default.
Last Inspection DateThe date of the most recent inspection of any type on the component. Open Leaks grid only. Hidden by default.
Last Inspection TechThe technician who performed the most recent inspection on the component. Hidden by default.
Last Inspection TypeThe detection method (M21, AVO, OGI or Cooling Tower) of the most recent inspection on the component. Open Leaks grid only. Hidden by default.
Last OGI ResultPass or Fail from the most recent OGI inspection on the component since the leak opened, so you can tell which open leaks have already been re-checked with a camera. Open Leaks grid only. Hidden by default.
Last PPMThe PPM reading from the most recent Method 21 inspection on the component. Shown by default on the Open Leaks grid. On All Leaks it is hidden by default and blank for closed leaks.
Leak ActionsThe six buttons above the Open Leaks grid: View Leak, Set Next Action, Plan DOR, Add Comment, Close Leak and Add To Tour. Some stay grayed out until you select the right number of leaks: Set Next Action needs one or more, and the DOR button needs exactly one. The DOR button reads Plan DOR when the tag has no open DOR and Add to DOR when it already has one. Close Leak becomes Close [N] Leaks when more than one is selected. Viewing any leak opens every leak on that tag, not only the row you ticked.
Leak StatusOpen or Closed. On All Leaks, filter this column to Closed to see closed leaks only.
Next ActionThe next action required on a leak, such as Report to Maintenance, Await Maintenance or ReTest. Set it with the button above the grid or in the individual leak view. For DORs, set it in the individual DOR view. Setting the Next Action doesn't automate anything. For example, choosing ReTest doesn't schedule the retest; you still need to add the component to a ReTest tour or schedule it. It starts counting days in Waiting Action so you can track progress.
RegulationGenerated by Chateau's rules engine and can't be edited. If more than one regulation applies, all are listed.
Secondary LeaksA leak found at a higher PPM on an existing leak after an attempt and retest.
TourIf the leak was added to a tour, the tour's name appears in this column.
Trigger PPMThe PPM that triggers the leak for the applicable regulation. Hidden by default.
Waiting ActionHow many days the leak has been at its current Next Action. Hidden by default.
Work OrderAssign a work order number by opening the leak and entering it. You can view and sort work order numbers in the grid.
Next ActionWaiting ActionMeaning
Await Maint.8 daysYou have been waiting to hear back from Maintenance for 8 days.
Report to Maint.2 daysYou have been waiting to report this leak to Maintenance for 2 days.
ReTest1 dayYou scheduled this for ReTest yesterday.
ReTest0 daysYou scheduled this for ReTest today.

Showing a hidden column​

  1. Open the Columns panel on the right edge of the grid.
  2. Type the column name (for example, Last PPM or Last Inspection Date) in the search box at the top of the list.
  3. Tick the column to add it to the grid.
  4. To keep it for next time, open Menu > Save Grid Layout.

If a column is in the grid but you can't see it, it may be off-screen or pinned. Scroll right, or see Common Grid Features for pinning and other grid options.

Leak Details​

Individual leak view

ActionProcess
Add AttemptAdd attempt records manually here.
Add M21/AVO ReTestAdd inspection records manually, with M21/AVO Why = ReTest.
CommentsView and add comments in this tab.
Emission PointThe point on the component where the leak was detected, such as Bonnet, Stem or Cap. Click the pen icon to change it.
ImagesView target and inspection images.
Leak Event TilesShows the event that triggered the leak, plus any attempts and retests. Click a tile to view or edit the inspection record. You can also add documents to inspections.
Next ActionSelect the next action for this leak.
TagClick the linked number to open Tag View.
Work OrderClick the pen icon to edit the work order number.

Note: Chateau uses the time of an attempt when linking it to a leak. For example, if a repair attempt was performed at 5/2/24 11:24 AM and the leak was closed at 5/2/24 10:23 AM, the attempt won't show on the leak record, leak reports or DOR reports. Change the attempt's time to before 10:23 AM, or change the leak's close time to after 11:24 AM.

Finding Closed Leaks​

There is no separate Closed Leaks subtab. Closed leaks are in the All Leaks grid alongside open ones. Filter the Leak Status column to Closed to see only those. From there you can open a leak's details and re-open it if it was closed in error.

Two things to know about All Leaks:

  • It is view-only, so the action buttons on Open Leaks aren't offered.
  • It opens with a query already applied (Date Opened, Greater Than, one week ago). A leak older than that won't appear until you widen or remove that criterion in Show Query.

Closed leaks grid