Skip to main content

Monthly Monitoring Summary Across All Regulations

Published: 2026-11-10      Revised: 2026-11-17

The compliance reports in Chateau, such as the Periodic Inspection Summary and the Agency SemiAnnual, are run one regulation at a time. If you need a single list of everything that was monitored this month, across the whole facility and every regulation, use the Inspections grid instead and export it.

This article covers:

Getting everything monitored this month (all regulations)​

1. Open the Inspections grid​

Go to Inspections & Attempts > Inspections.

2. Set the date range​

The grid opens with a Date Performed query row already filled in for the last seven days. Change it to cover the month:

  1. Click Show Query.
  2. Set the first row to Date Performed is Greater Than or Equal To the first day of the month.
  3. Click Add Fields to Query and add a second row: Date Performed is Less Than or Equal To the last day of the month.
  4. Click Search.

Tip: Click the heart icon to save this as a Saved Query (for example, "This Month – All Inspections"). Next month, load it and just change the dates.

3. Narrow to one inspection type (optional)​

The grid returns every inspection type (M21, AVO, OGI) performed in that window. To see only one, for example M21:

  • Open the Filters panel on the right side of the grid and filter Inspection Type, or
  • Add an Inspection Type row to your query before you click Search.

4. Choose your columns​

Open the Columns panel on the right side of the grid and select the fields you want. These columns match what most monthly monitoring reports show:

Report fieldInspections grid column
UnitLUnit (or Process Unit)
TagTag
TypeComponent Type
LocationLocation Description
Inspection DateDate (and Time, if needed)
Inspection TypeInspection Type
ReadingFinal PPM
ResultResult
TechnicianTechnician
AnalyzerAnalyzer
M21 VarianceM21 Variance
FrequencyFrequency
RegulationsSatisfied Regulations

Several of these columns (Location Description, M21 Variance, Frequency, Satisfied Regulations) are hidden by default, so turn them on in the Columns panel. Satisfied Regulations shows which regulations each inspection counted toward, which helps when one list covers several rules.

To put the columns in a different order, drag the column headers. To keep this layout, open Menu > Save Grid Layout.

Note: Leak definition is not on the Inspections grid because it depends on the regulation. If you need it, run the regulation-specific compliance report.

5. Group the results (optional)​

To see counts at a glance, use Group by from a column header's menu, or drag fields into Row Groups in the Columns panel. For example, grouping by LUnit and then Inspection Type shows how many inspections were done in each unit.

6. Export​

Open Menu on the right side of the grid and click Export to Excel (or Export to Csv). The export contains the rows and columns currently displayed. You can save the Excel file as a PDF if you need to send it on.

When to use the compliance reports instead​

The Inspections grid is a list of inspections. The compliance reports in the Compliance folder on the Reports tab do more, but each one needs a single regulation.

Inspections gridPeriodic Inspection SummaryAgency SemiAnnual
RegulationsAll at onceOne per runOne per run
Inspection typesM21, AVO and OGI together, or filteredM21 or AVO (pick one)M21
DetailOne row per inspectionOne row per component group (unit, type, physical state, frequency, UTM, DTM, MMQ group)Totals by unit and type, by month, for 6 months
Component counts (start, added, deactivated, end)NoYesYes
Leaks, DORs, TUx countsNoYesYes
Leak %NoNoYes
Best for"Show me everything we monitored this month"Checking coverage and counts for one regulation before a submissionSemiannual agency reporting

Use the compliance reports when you need counts, leak and DOR totals, or numbers formatted for an agency submission. For a facility-wide total, run the report once for each regulation.

For details, see Periodic Inspection Summary and Compliance Reports.

Seeing what is still due this month​

There are three ways to see what is left for the month.

Components Grid, Saved Query​

  1. Components › Show Query.

  2. Add a row: Next M21 Due — Less Than or Equal To — the last day of the month (or today / 4 days out / this Sunday / 12/31 for the other old Home counts).

  3. Search. The grid lists every component due by that date, including anything past due. The row count at the bottom is the number due.

  4. Columns panel: Turn on Next M21 Due, Next M21 Why and Tours (to see what's already on a tour).

  5. Heart icon to save it (e.g. "M21 Due This Month"). Saved queries keep the typed date, so update it and Search each time.

Schedule​

To see which components are still due:

  1. Go to Tours > Schedule.
  2. Use Select End of… to pick the end of the month (or enter an End Date), then click Search.
  3. The grid shows every scheduled inspection due by that date that is not already on a tour. Click a number in the Inspections column to open those components in a grid.

Note: Components already on a tour are not shown on the Schedule. To see those, check Tours > Current Tours, or the M21s Left in Tours and AVOs Left in Tours counts on the Home screen.

Operations Dashboard​

Switch the toggle at the top to Month. Each Inspection Burndown card shows inspections completed, the total required this month, the number remaining, and whether you are on pace. Click View [N] Remaining to open the Schedule filtered to the open requests. The Tour Coverage table shows how much of this month's work is already on a tour.