Skip to main content

Insights: LSTAR & Time on Tools

Published: 2026-11-03 Revised: 2026-11-03

Note: Insights is a Beta feature. To have it enabled for your database, please reach out to LDARtools Support.

Insights is where you look at your program over time rather than one day at a time. This article covers the two parts of Insights that deal with technician effort: the LSTAR & Time on Tools tab and the Technician Review tab. For how the LSTAR score itself is calculated, see LSTAR.

To open Insights, click Insights in the left-hand menu, just above Settings.

Choosing the period​

Every number on these two tabs covers the period you pick at the top.

  • Period — choose a rolling period (This quarter, This month, This year), a recent window (Yesterday, Last 7 days, Last 30 days, Last 90 days, Last 180 days, Trailing 12 months), a specific past quarter, month, or year, or Pick a date range… for your own dates. The default is This quarter, compared with Previous period.
  • Compare against — add up to three periods to compare with, such as Previous period or Same period last year. The ▲▼ arrows next to each number compare it with the first of these. Green means the change is in the good direction for that number; for example, a drop in break time is green.
  • Filters — click + Add filter to narrow the page. On the LSTAR & Time on Tools tab, only the Technician and Work Performed filters apply; a banner tells you which filters the tab is ignoring. Filters are not saved, so they start clear the next time you open Insights.

Each tab shows when it was last updated (for example, Updated 5 min ago). Click it to refresh the tab.

LSTAR & Time on Tools tab​

The tab has two views. Use the LSTAR Scoring and Time on Tools buttons at the top right to switch between them.

Every average on this tab is a total divided by a total. For example, Avg LSTAR Score is the sum of every technician's daily points divided by the number of technician-days, so a technician who worked 60 days counts more than one who worked 5.

LSTAR Scoring​

Summary tiles

TileShows
Avg LSTAR ScoreThe average daily LSTAR score across all technicians
Hero Day CountThe number of perfect 100-point days, where all six standards were met
Hero Day %Hero Days as a percentage of all technician-days
LSTAR Tech Work DaysThe number of technician-days scored. Four technicians working one day counts as four days

LSTAR by Technician

One row per technician. For the selected period and the comparison period, it shows Field Days, Avg LSTAR, Hero Days, and Hero %. For the selected period only, it also shows the technician's current Streak, their ToT % (of payroll day), and their Status (FLAG or OK) from the technician scorecard. Click a technician to open their Tech Detail panel.

Avg LSTAR is colored green, amber, or red against your site's target (80 by default).

Missed Standards — Tech × Standard

A grid of technicians against the six standards: AM Break, First Component, Lunch, PM Break, Last Component, and Daily Count. Each cell is the number of days that technician missed that standard during the period. The darker the cell, the more days missed. The bottom row totals the whole crew.

Use this to see whether a low score comes from one habit, such as consistently late starts, or from a mix of things.

Hero Streak Leaderboard

Each technician's current run of Hero Days in a row, counted back from their last workday in the period, alongside their total Hero Days for the period. Streaks count workdays, so a weekend does not break one. A streak only counts days inside the selected period.

LSTAR Score Trend

A small line for each technician showing their Avg LSTAR over time. For a quarter or month, the line shows it and the three before it. For any other period (a year, a rolling window, or your own dates), it shows the selected period and the comparison periods you chose.

Daily LSTAR Detail

One row per technician per day, with a ★ on Hero Days. Columns: Technician, Work date, Total Points, Hero, Daily Comp Target, Total Comps, First Comp Time, AM Break (min), PM Break (min), Lunch (full window, min), Last Comp Time, Work Performed, Excess Gaps, and Leaks Found. Breaks and lunch are shown in red when they are over your site's limit.

Time on Tools​

Summary tiles

TileShows
Avg Time on Tools per DayThe average hours per technician-day spent actively inspecting
Avg Break TimeThe average AM plus PM break minutes per technician-day. Lunch is not included
Avg LunchThe average lunch length, counting only days that had a lunch
Avg Additional GapsThe average minutes per day of other gaps: time away from the tools that wasn't the AM break, PM break, or lunch
ToT Efficiency %Total Time on Tools as a percentage of total payroll time, against your site's healthy level (45% by default)

Tech ToT Scorecard

One row per technician: Field Days, ToT hrs/day, ToT % (of payroll day), Avg Break (min), Avg Lunch (min), Additional Gaps (min), and Status. Avg Lunch is shown in red when it is over your site's lunch limit.

ToT Efficiency by Technician

A bar for each technician's Time on Tools percentage, with a marker at your site's healthy level. The scale stops at 60% or a little above the highest technician, whichever is higher, rather than at 100%, so the differences between technicians are easier to see.

Work Pattern — inspections by hour of day

When your crew inspects during the day.

  • The grid shows, for each technician and for All crew, the average number of inspections started in each hour (6 AM to 7 PM) per workday. Each row is shaded against its own busiest hour, which is outlined and named in the Peak column, so you can compare the shape of each technician's day even if their volumes differ.
  • The chart below it shows the whole crew's total inspections in each hour for the period. The dip in the middle of the day is lunch.

Click a technician's row to open their Tech Detail panel.

Daily Time on Tools Detail

One row per technician per day: Technician, Work date, First Comp Time, Last Comp Time, Time on Tools (hrs), ToT %, AM Break (min), PM Break (min), Lunch (full window, min), Additional Gaps (min), Total Gap Time (min), and Total Comps. Time on Tools plus Total Gap Time always equals the time from the first inspection to the last.

Technician Review tab​

The Technician Review tab gives you one card per technician, with the technicians who need attention first.

At the top are four tiles: Inspections, Component Leak Rate, Avg LSTAR, and Inspections / Hour (span).

Each card shows:

  • The technician's name, a FLAG or OK label, and how many signals were flagged.
  • Avg LSTAR, ToT %, Insp/hr · on tools, and Insp/hr · span, each with a ▲▼ arrow against the comparison period.
  • Inspections and First-Attempt Success for the period.
  • MOC Edits (component edits and new components credited to the technician) and Field Events.

Click a card to open the technician's Tech Detail panel.

How flags work. FLAG and OK come from the technician scorecard signals, such as repetitive PPM readings, a low leak find rate, or, if turned on, impossibly fast inspections. You set which signals are on and how sensitive they are on the Scorecard Thresholds tab of Quality Signals.

Flags are judged on a review period, by default the quarter, so changing the Period at the top of the page changes the numbers on the cards but not whether a technician is flagged. The card says which review period the flags are from.

"No signals flagged" means nothing measured looked unusual. It does not mean the technician's work was checked and found clean.

Small crews. Most signals compare each technician with the rest of the crew. If fewer technicians worked the review period than your site's minimum crew size (5 by default), the tab shows a Thin sample label and only the signals with a fixed limit can flag anyone.

Exporting​

Every table has a ≡ menu with Export to CSV, which exports the table as you see it, and Export to Excel…, which opens a choice of what to export. Export records… on the Technician Review tab opens the same choice:

  • Summary — as shown — the table as you see it.
  • Source rows — technician-days — one row per technician per day, with the six standards (met or not), the points, the breaks and gaps, and Time on Tools.
  • Raw records — inspections and gap segments — every inspection, and every gap with its start and end times and whether it was counted as the AM break, lunch, PM break, or an additional gap.

Exports cover the selected period and comparison periods, with your filters applied. An export over 200,000 rows on a sheet is refused; narrow the filters or choose fewer periods and try again.

Where the targets come from​

The LSTAR targets, point values, and the gap that counts as a break are set in Settings > Quality Signals. The green, amber, and red levels on Insights tiles are set on the Insights Thresholds tab of the same page.