Skip to main content

Deactivating Many Components at Once (Using a Tour)

Published: 2022-11-10      Revised: ---

If you have a batch of components to deactivate, you don't have to look up and edit each tag one at a time. You can gather the components into a tour (or any Components grid selection), then change all of their Profiles to DeActivated in one multi-edit.

This article covers:

Before you start​

Caution: Only deactivate components you are taking permanently out of service. Deactivating ends the component's rule assignments. If a component is only temporarily unavailable (for example, during a turnaround), use TUinService or TUPurged instead. See TUx Management.

  • You need the MOC Approver role for the change to take effect immediately. If you are a suggester, your change goes to the MOC Porch for approval, and nothing changes until it is approved. See the MOC roles section of How to Edit Components.
  • If a single query can find all the components (for example, all components in one LUnit, Area or Location Description), you don't need a tour. Run the query in the Components grid, select the results and skip to step 4 below.

Deactivating components from a tour (Chateau)​

A tour is a handy way to collect components that don't share a common property. For example, a list of tags from a demolition walk-down.

1. Put the components in a tour​

Add the components to a new tour, using any of these:

  • Components grid: select the components and click Add To Tour.
  • Schedule: build a tour from the components' scheduled inspections.
  • Missing Tags porch: if technicians flagged the components in the field (see below), select them on the porch and click Build Tour.

Give the tour a name you'll recognize, such as "Deactivate – Unit 12 demo".

Flagging components in the field: Components can't be moved between tours in Chateau Mobile. If the technician is the one who finds the components to remove, mark them in the field so you can find them in Chateau afterwards. Use either of these:

  • A common property: edit the components in Chateau Mobile so they share a property value you can query on later, for example a note in Location Description. Then query for that value in the Components grid and skip the tour.
  • The Missing Tags field event: the technician records a Missing Tag field event on each component. With the Missing Tags audit turned on in Porches > Audit Settings, the components show up on the Owner's Porch, where you can select them and click Build Tour. See Field Events and Field Event Audits.

2. Load the components in the Components grid​

  1. Go to Components.
  2. Run a query that includes the components in the tour. If you aren't sure what to query on, click Search with no query to load all active components.

Note: Tours is not available as a query field, so you can't query by tour name directly. Use the Tours column filter in the next step instead.

3. Filter to the tour​

  1. Find the Tours column in the grid (it is shown by default).
  2. Click the filter icon in the column header and filter to your tour's name.

Only the components in that tour now show in the grid. Check the row count matches the number of components you expect.

4. Multi-edit the Profile​

  1. Select all of the filtered rows.
  2. Click Multi-Edit [N] Components.
  3. Click the Profile and set it to DeActivated.
  4. Select a Profile Change Why and an Effective Date, then click OK.
  5. Click Save.
  6. In the MOC prompt, check Approve (if you have the Approver role) and click Save.

The components are deactivated and removed from the Schedule and from any tours. Deactivated components are hidden in the Components grid by default. To see them again, check Include DeActivated in the query.

What happens to components that are in a tour​

When a deactivation is approved, Chateau immediately deletes the component's pending inspection requests and requirements. This happens whether the approver chooses Run Rules or Skip Rules. As a result:

  • The components are removed from every tour they are on, not only the tour you used to find them, and from the Schedule.
  • If that leaves a tour empty, the tour behaves like any other emptied tour. Evergreen tours stay. Other tours dissolve.
  • No new inspections will be scheduled for those components while they are DeActivated.

If the change is only suggested (pending on the MOC Porch), the components stay Active and stay in their tours until someone approves it.

TUx works in a similar way. When a component is set to TUinService or TUPurged, its scheduled inspections are removed from tours and the Schedule. See TUx Management.

Deactivating components in Chateau Mobile​

Yes, you can deactivate several components at once on the handheld, as long as they are in a tour you have checked out.

  1. Open the tour and go to its component list.
  2. Tap Select, then tap each component to deactivate, or tap Select all for everything currently shown in the list.
  3. Tap Actions · N selected at the bottom of the screen, then choose Multi-edit.
  4. Tap Profile. In Set Profile, choose DeActivated, select the Profile Change Why and confirm the Effective Date.
  5. Tap Save and choose the Change Why for the edit.
  6. Check in the tour.

If you have the Approver role, the deactivation takes effect when the tour is checked in. If you don't, it is sent to the MOC Porch as a suggestion. The components show a purple Pending chip until someone approves it.

To deactivate a single component on the handheld, open its Component Details and edit the Profile instead. See Component Management.